Best Hole Saw For Drywall

Drywall is a cost-effective and durable material to finish your interior wall or ceilings.It is also handy in making design features like arches and eaves or architectural functions.

Considering it is a lightweight construction material, it’s more preferable to other conventional substances such as plaster or blocks because it is less laborious,time-saving, and very straightforward to install.

Drywalls possess powerful sound insulation properties and excellent fire-resistant effects. At some point, you may need to hang some artwork, speakers or install some cables through the drywall, and you will have to get the best hole saw for Drywall to accomplish the project.

What Type of Hole Saw is Ideal For Drywall?

There are quite a variety of tools suited for cutting holes through the drywall. The variable Pitch Bi-Metallic type of hole saws gives the smoothest cuts on drywall for larger diameter holes. 

Their teeth configuration is progressive, make powerful bites, and fast waste materials clearance. This hole saw contains a small percentage of cobalt, making them highly resilient and durable. The cut depth is up to 30mm and usable with different variable speed drills.

Nonetheless, if you want to drill smaller holes, find the correct drywall bit for drywall.

Hole Saw for Drywall Reviews

Bi-Metal 152mm HSS Heavy Duty Hole Saw

Leading on our list is the high-performing 152 mm Bi-metal hole saw by CPRSOP. They bring you this affordable and sturdily designed hole saw to help you cut holes with ease.

It can be used to cut various applications,including drywall,metal acrylic, and others. Its high grade of heat resistance and toughness is an assurance that it’s going to last long.

CPRSOPS’ Heavy duty hole cutter double metal film comes with razor-sharp teeth for fast cuts.

The six-sided center strong configuration fits into any ½”electric drill with no restriction.

You will have an easy time removing waste materials through the hole openings foundon the sides.

Always make incisions slowly. Tightening the shaft is simple. Use a hand wrench and move it in a clockwise manner.

The CPRSOP hole cutter weighs 1.25645 kgs, measures 152mm in diameter and 38mm opening depth. The tools package has 1piece of a pipe hole borer, one strong hexagonal shank, a hex wrench, & 2 drilling bits.


•        HSS Bi-metal material for strength and durability

•        Sharp teeth for easy cutting

•        Side openings for chip removal

2. MAG625 Carbide Grit Hole Saw

Over the years, Magbit has continuously produced well-performing tools. This timewe present their 1-9/16 deep carbide grit hole saw. It makes use of a standard shank arbor or SDS, which takes in various brands of hole saws.

The 1.05 pounds hole sawoperates in two ways, SDS hammer mode and rotary. That means you could use it either in a forward or reverse manneras need be.

The 4-1/8” Mag625 works quite fast.In only 7 seconds and you are done drilling holes on thematerial you are working on. The Carbide grit hole saw is suitable for cutting stucco, concrete blocks, and backer boards.

Note that you will need to chisel out the core as you continue cutting. Apply low speed while drilling and plenty of water to rid away dirt and avoid overheating.

The 6.3 by 5.2 by 2.4 inches Mag625 makes quick, precise, and neat cuts, and the carbide grit beats dust.This hole saw is not to be used with an RPM exceeding 250 and prompts you to acquire a drill matching this speed. Features

  • Functions in both rotary &SDS hammer mode
  • Carbide grit for smooth cuts.
  • SDS shank make

3. Blue Boar Carbide Grit(6-3/8) Hole Saw

If you are searching for a sturdy Tungsten Carbide Grit hole saw to cut abrasive materials, this may be an excellent option for you.

The 14 ounces Blue Boar hole saw features a continuous cut edge to make you achieve extra smooth cuts. This one won’t bite your materials and functions perfectly when you want to mount 6” recessed light holders on soffits or ceilings.

This round and blue hole saw is an easy-to-use tool best suited for cutting Hardie boards, plaster, drywall, lath, and more. Note that the pilot bit, shield, arbor, and the Hole Pro X-230+ are not inclusive.

The steel-made Blue boar carbide grit functions nicely with Arbor kit and Hole Pro (HP1156) large shield and connects to the standard 5/8 inch – 18 two-pin mount hole saw. The tool has an open back make for easy and quick chip removal. You could use any drill with this hole saw, and you will need a shank if you don’t own one.

Overall, the Blue boar hole saw makes your work easy, smooth cuts, durable, and worth every single penny.


  • Open back to remove chippings
  • Continuous cut edge
  • Sturdy Tungsten Carbide grit edge

4. Milwaukee 6-3/8″ Electric 49-56-0305 Hole Saw

We could not leave out Milwaukee from our list. Their 6-3/8” hole saw is the tool you soo much need when mounting recessed light fixtures.

The 1.4 pounds electricity-powered tool easily cuts through abrasive materials without too much energy.

The maximum RPM for the Milwaukee hole saw clicks at 600 RPM to achieve the best results. It is 6-3/8 inches in diameter, and the cut depth is 1-3/4. Its carbide grit edge cuts on many materials, including ceiling tile, plaster, drywall, and acoustical tile.

This tool exhibits superior performance while its continual rim cuts clean without ripping off materials for a refined finish.

It also features an open back feature for fast removal of the plug and a welded build to cut accurate holes as per the requirements.

Hole sizes for recessed lights of between 4-3/8 inches to 6-7/8inches are all available as you need them. You may need to buy an arbor since the package does not include one. Get an arbor with 5/8-18 thread plus tight hole- shooter of ½” capacity or more.


  • Carbide grit cut surface
  • 1- ¾ inches cut depth, and 6-3/8 inches cut diameter
  • 600 rpm speed

5. 6 Inches Red Hole Saw Blade with HSS Arbor

Your search for a versatile hole saw ends here. The Ninat 6 inches hole saw is a robustly built hole cutter suitable for cutting holes on various substances, including ceiling lights, gypsum boards, thin iron boards, and others.

This red hole saw weighing 2.59 pounds whose blade material is M42 HSS, long-lasting and robust. Its mandrel measures 0.43mm with clockwise rotations. We love its high resistance to abrasives and the potency to cut even the toughest of substances super easy and fast.

This 6.34 by 6.34 by 1.97 inches High-speed steel tool comes with hardened solid teeth that cut more deeply than a jigsaw. You may need to take the ductwork and fitting measurements first, and a cordless drill will work well with the Ninat 6 inches M42 hole saw.

You may at some point notice thishole saws surface peeling or coming off the paint as a result of hard toil. Nevertheless, that should not alarm you since it’s not going to affect the tool’s potency.

It is not hard to use this saw. Grab the drill usingboth hands and push the bit gently until the hole saw scuffs the surface you need to cut. Proceedto plunge without any pressure and maintaininglow speed. Shut down the drill when the saw penetrates to the other side of your substance.


  • 10.95mm mandrel diameter
  • M42 HSS material
  • Strong abrasive resistant saw teeth
  • 6 inches in size

QWORK-40-200mm Twin Blade Adjustable Hole Saw-Cutter

We could not end this list without featuring QWORK. If you need a hole saw for professional use, this is the right pick. It works perfectly, leaving either your drywall, plastic, or plaster smooth with an even surface. You can use it to cut holes of 8inch diameter using a 19mm cutting depth from one edge while both sides make 30mm.

The QWORK-40-200mm is very safe due to its ABS shield and consists of a silicon gasket(rubber) that helps collect the debris and clippings. So, it’ll leave your work area clean and also protect you from inhaling harmful dust.

The best thing about this 12.6 by 12.6 by 4.92 inches hole saw is that it’s easy to operate.  You can use it to do all the work alone without calling for assistance. It also comes as a complete set, so you’ll not spend extra cash buying some other parts.

The QWORK-40-200mm stainless steel is very convenient as you can replace several hole saws using a single-hole cutter kit. It also has multiple uses, like making ceiling speakers and vent holes, so it’s ideal for both a carpenter and a contractor.

The package contains two pilot drilling bits that can be replaced, One professional grade adjustable hole cutter, two sets replacement cut blades (one is a high-speed steel blade while the other is tungsten carbide blades). One ABS shield for trapping dust, One adjustable hex wrench, Five brad-point boring bits for wood, Five masonry bits of dimensions 5/32inches, 3/16 inches, ¼inches 5/16inches, and  3/18inches, one tape measure, and a storage case.

The most exceptional characteristicwe found on this tool is its (ABS) shield. Unlike all holesaws in our review, this one has a way to protect the user from dust and dirt exposure.


•        High-quality stainless steel for durability

•        Convenient and economical

•        ABS dust shield for protection against dust

•        Silicon rubber gasket.


1. How do you cut a hole in drywall?

Start by carefully making accurate measurements and marking the center of the hole to avoid compromising the project. Get a drill with a torque control( to keep speed under check)and your hole saw drilling bit ready.

Set the speed of the drill and place it on the exact marked point. With the drill in a perpendicular position, press the start button and gently start drilling a hole.

Increase the speed as you press the machine onto the drywall. In no time, the hole will be ready. Safeguard yourself from dust by wearing eye and nose protectives.

When done drilling, check the hole; it should be smooth and accurate.

2.Can you use a hole saw on drywall?

It depends on the size of the hole you want to cut. If you are making extra large round holes of upto 6 inches, you have to use a drywall saw. On the other hand, if you need to cut small circular vents,an adjustable hole saw drill bit would cut fast and smoothly provided you mark the center of the circle on the drywall.

3.Will a hole saw cut through plaster?

A hole saw can cut through the plaster. However, you will notice that you make a few holes and the holesaws teeth grow dull and blunt. This is because plaster is tough and cohesive, and you need to get the right set of tools to cut through plaster without cracking it.

4.Can I use a spade bit on drywall?

Although you can use a spade bit on drywall, it is not a good choice. A Spade bit is flat and features two sharp lips primarily for making holes on wood. Its configuration makes it quickly remove debris out of the hole you are drilling. Drywall is easy to cut through and if you use a spade bit,observe care and slow speed. However, note that you will end up with a rough opening.

5.Why is drilling into brick so hard?

There are different types of bricks, depending on the methodology used to make them. Generally, bricks have a high degree of hardness, an essential property to guarantee a construction’s durability.

Drilling through brick is not complicated but gets more challenging if you use the wrong tools. For an easy experience, identify the type of brick you will drill and find guidance on the right tool to use.

Last Updated on April 11, 2021 by John G. Anderson

Spread the love

Leave a Comment

Your email address will not be published.

Scroll to Top